Concrete Contractor in Alice, TX - Floors and Flatwork That Hold Up
Laredo Concrete Company is the concrete contractor property owners call in Alice, TX for garage floors, driveways, and parking areas. Send us the details and an answer comes back inside one business day, with a free estimate at the property to follow.
- Licensed and Insured
- Locally Owned
- Free Estimates
- Satisfaction Guaranteed
Services we provide in Alice, TX
Garage floor concrete
Plenty of garages in this town double as a shop, so the floor takes tool chests, jacks, work truck tires, and whatever gets spilled on a Saturday. Our garage floor concrete work begins by testing moisture and looking at the cracks, because that decides whether you need a new slab or a properly prepared finish.
Concrete driveway building
Drives on the established streets in town have usually been cut for a utility, extended once, and patched since. We take the whole surface back to a base we can stand behind rather than adding one more panel to a slab that is already moving in three directions.
Concrete parking lot building
Highway frontage on US 281 and SH 44 brings service rigs, ag equipment, and delivery trucks onto pavement laid out for customer cars. We pour the drive aisles and approach for the heaviest vehicle that turns there and phase the work so the business stays open.
Concrete sidewalk building
A raised panel out front is the kind of thing a customer notices with their toe. We rebuild public facing walks as a continuous route with even transitions, and we check first whether the stretch falls under the city right of way rules.
Concrete cutting
Adding a line, a drain, or a doorway through an existing slab goes better when the opening is cut clean instead of broken out. Sawing to the layout keeps the surrounding concrete intact, which matters most on the older slabs here that have already been trenched once.
Foundation raising
An added room or a patio poured years after the house often settles at its own pace, leaving a step where two slabs meet. Lifting is worth pricing next to replacement whenever the concrete above the settlement is still sound and the cause has been found.
Why Alice properties need a concrete contractor who understands local conditions
This is hot, humid South Texas on the coastal plain, and that combination is less predictable to work in than steady dry heat. Some days the humidity slows surface drying and stretches the finishing window; other days sun, wind, and high concrete temperature pull moisture off fast enough to cost you the surface if the crew is behind. Storm exposure and wind add a second layer, because temporary protection and the decision to pour or wait have to be made on the day rather than from a calendar. The practical result is that a good crew here plans placement, jointing, protection, and curing from conditions and keeps enough people on site to finish what they place.
What sits under and around the concrete is the other half. Rainfall on flat ground makes drainage the deciding factor at driveways, patios, foundation edges, and parking lots, and a surface that holds water after a storm is telling you the grade and the outlet are wrong. Older slabs in the established neighborhoods hide utility cuts, additions, and drainage changes that never show from above, and coastal plain soil and fill vary enough from parcel to parcel that calling every site expansive clay is a guess rather than a finding. Then there is load: highway frontage along US 281 and SH 44 sees energy and agricultural service traffic that a family driveway section will not survive, which is why one pavement design cannot cover a whole town.
Working in Alice: what we know from being on the ground here
The form we work from before quoting flatwork in this city is the City of Alice residential building permit application, which names flat work and subdivision sidewalks on its face and routes review through Building Inspection, Public Works, Engineering, and other departments as the project requires. We read the current version with the Inspection Department rather than assuming what applied on the last job, because the city can also require material testing on subgrade, base, and concrete for right of way work.
Day to day, that means replacement flatwork on the older residential streets where access is tight and the utility history is long, commercial work along the US 281 and SH 44 frontage where a state road approach can involve TxDOT, and pours out in Jim Wells County brush country where the haul is longer and there is more room to stage. Live businesses usually need the job phased into smaller placements so customers can still park, which is a scheduling decision made before pricing rather than after. The same crew runs south to Kingsville, TX and west to our home base in Laredo, TX, so a job here is booked on a route we already drive.
How does the process work when you call us in Alice?
Tell us what the surface does
Call or send the form with the address, the size, and what parks, stores, or walks on the surface. You get a reply within one business day from someone who can ask the right follow up questions.
Free on-site look at the slab
We measure, then check drainage, cracks, joints, old utility cuts, moisture signs, and where a truck can reach. It costs nothing, and for anything going over an existing floor it is where we find out whether a coating is even the right call.
Written scope with the city path
The scope names preparation, thickness, base, reinforcement, joints, finish, curing, and exclusions, and says plainly whether we are changing structure or only the wearing surface. It also states which city review your project needs and who files it.
Placement and return to service
Work is scheduled around heat, wind, and storm exposure so fresh concrete is protected while it cures. At handoff you get the dates for foot traffic, vehicles, storage, and hot tires, plus cleaning that will not damage the finish.
Find Out What Your Alice Concrete Project Costs
Give us the Alice address, the square footage if you have it, and photos of the floor or slab in question. You hear back within one business day, and the office rings you to book a free on-site estimate with nothing owed either way.
(956) 955-8166Frequently asked questions
About Alice
Alice is the seat of Jim Wells County and sits where US 281 and SH 44 cross, which is most of the reason the town feels like a junction. Downtown and the residential streets around it hold homes and small commercial buildings with decades of concrete in front of them, so the work there is nearly always replacing something: a walk that has lifted, a drive that has been cut for a line, an apron that no longer meets the street. The highway frontage is a different building stock entirely, with service yards, shops, and parking that take heavier vehicles every day.
Beyond the city, the South Texas brush country spreads out into larger parcels where energy and agricultural traffic runs, and properties there ask for equipment pads, long drives, and pavement rated for weight rather than appearance. Routes from here reach toward Corpus Christi in one direction and the Rio Grande Valley in the other, which keeps a steady mix of commercial and residential work moving through town. Those same conditions, hot humid air, storm runoff, and parcel by parcel soil, follow the road southwest into McAllen, TX.
Concrete Contractor Services Available in Alice, TX
Concrete driveway building
Cracked, rutted driveway? Get a level slab sized for your vehicles and drainage.
Learn MoreConcrete patio construction
Turn an unusable back corner into a smooth, well drained patio that fits your furniture.
Learn MoreStamped concrete services
Get the look of stone or tile in one continuous, sealed concrete surface.
Learn MoreConcrete sidewalk building
Replace trip edges and broken panels with a safe, continuous walkway to your door.
Learn MoreGarage floor concrete
Pitted, dusting garage floor? Get a level slab that handles tires and tool chests.
Learn MoreDecorative concrete
Add color, borders, and texture to plain gray flatwork without switching to pavers.
Learn MoreConcrete retaining walls
Hold back a sloping yard with a wall built for drainage and real soil loads.
Learn MoreConcrete floor installation
Get a flat, hard interior floor ready for tile, coatings, or heavy shelving.
Learn MoreConcrete pool decks
Replace slick, broken pool decking with a textured surface that drains away from water.
Learn MoreConcrete steps construction
Rebuild wobbly or crumbling steps into solid, even risers with safe footing.
Learn MoreSlab foundation building
Start your build on a properly prepared, reinforced slab sized for the structure.
Learn MoreFoundation installation
Get footings and foundation walls set true so the structure above sits level.
Learn MoreConcrete parking lot building
Pave customer and truck parking with concrete rated for the loads you actually carry.
Learn MoreConcrete footings
Put the right footings under a deck, wall, or addition before the load arrives.
Learn MoreFoundation raising
Lift a settled slab or pier foundation back toward level before damage spreads.
Learn MoreConcrete cutting
Cut clean openings for doors, plumbing, and trenches without wrecking the surrounding slab.
Learn MoreServing these cities and communities.
Ready to Replace the Concrete at Your Alice Property?
A dusting floor or a drive that holds water only gets more expensive the longer it waits, and the estimate that tells you which fix you need costs nothing. Call the office or send the form and we will come take a look.